XTOOL 12+8 Universal Cable Adapter XTOOL FCA 12+8 Connector Cable Adapter used for Chrysler, Dodge, Ram, Jeep, and Fiat Security Gateway Module (SGM)

XTOOL 12+8 Universal Cable Adapter Support reading DTCs and viewing data. XTOOL FCA 12+8 Connector Cable Adapter used for Chrysler, Dodge, Ram, Jeep, and Fiat Security Gateway Module (SGM). CheShiTech.com Universal XTOOL FCA 12+8 Bypass Adapter Cable New Chrysler 12+8 Adapter Cable Work on Autel MaxiSys/IM608 /Launch X431 V/ OBDSTAR Support Chrysler, Dodge, Jeep, Fiat & Alfa vehicles till year 2019.

XTOOL 12+8 Universal Cable Adapter XTOOL FCA 12+8 Connector Cable Adapter used for Chrysler, Dodge, Ram, Jeep, and Fiat Security Gateway Module (SGM)

CheShiTech.com Universal XTOOL FCA 12+8 Bypass Adapter Cable New Chrysler 12+8 Adapter Cable Work on Autel MaxiSys/IM608 /Launch X431 V/ OBDSTAR Support Chrysler, Dodge, Jeep, Fiat & Alfa vehicles till year 2019

FCA 12+8 Adapter is used for Chrysler’s Security Gateway Module (SGM) which limits an aftermarket scan tool to only reading DTCs and viewing data.

2018 and newer Chrysler, Dodge, Ram, Jeep, and Fiat now have a secure gateway module or SGM. This SGM will not allow your scan tool to do bidirectional controls on the vehicle.The new Chrysler 12+8 Diagnostic Cable allows communication with latest model Chrysler, Dodge, Jeep, Fiat & Alfa vehicles.

XTOOL 12+8 Universal Cable Adapter Function:

1.OBD instrument mileage calibration, OBD anti-theft matching, etc.
2.Used with other diagnostic devices to read and clear fault code.

Chrysler 12+8 Bypass Cable Suitable for:

The Cable Adapter can be used with Autel Maxisys series scanners, such as MS906, MS906BT, MS906TS, MS908, MS908S, MS908S PRO, Maxisys Elite, IM608 etc.
OBDSTAR devices like OBDSTAR X300 DP Plus
Launch devices like Launch X431 V, Launch X431 V+, X431 Pro 5, X431 PAD 7 etc.

What is the XTOOL FCA 12+8 Bypass Adapter Cable Used for?

1. It’s used to diagnose on Chrysler Jeep Renegade Wrangler 300C after 2018 year
2. Most 2018 and newer FCA vehicles include a Security Gateway Module.

Expect to see this message when scanning a Chrysler with the Security Gateway Module:
DEVICE UNABLE TO COMMUNICATE WITH THE CONTROL UNIT
Placement of the SGM varies, but it is often located in the side kick panel, passenger side near the glove box, or behind the radio.

Please Note: YOU MUST USE THE APPROPRIATE CONVERTER. NO RETURNS WILL BE ACCEPTED FOR DAMAGE CAUSED BY USING THE WRONG POWER TYPE.

XTOOL FCA 12+8 Bypass Adapter Cable Features and Functions:

1. Read/ Clear Codes
2. Perform Active Tests
3. View Generic & Manufacturer Live Data
4. Perform TPMS OBDII Relearn
5. Coding and Adaptation with Maxisys Tablet Tools MS906BT+
6. ADAS calibrations (Requires Maxisys ADAS Software)

Connection Method:

1. Locate and unplug the 12pin and 8PIN connectors of the SGW module.
2. Then connect the FCA 12+8 directly to the 12pin and 8pin (two connectors connected to the SGW) connector on the car.
3. At this point, normal communication with the car can be achieved.

XTOOL FCA 12+8 Bypass Adapter Cable Supported Car List:

Chrysler
2018- Chrysler 300
2018- Chrysler Pacifica

Dodge
2018- Dodge challenger
2018- Dodge charger
2018- Dodge durango
2018- Dodge journey
2018- Dodge Ram

Jeep
2018- Jeep Cherokee
2018- Grand Cherokee
2018- Jeep compass
2018- Jeep Wrangler
2018- Jeep Renegade

Fiat
2018- Fiat

Maserati
2018- Maserati and Ghibli

XTOOL FCA 12+8 Bypass Adapter Cable Package Includes:

1pc x FCA 12+8 Universal Adapter