2024 Autel MaxiCOM MK808Z MK808S Bi-Directional Diagnostic Scanner Global Version Autel MaxiCOM MK808Z BT Full System Diagnostic Tablet With 40 Special Service Reset Functions Also Support IMMO Key Coding Update From MaxiCOM MK808/MX808

2024 Autel MaxiCOM MK808Z MK808S Bi-Directional Diagnostic Scanner Compatible with Autel MaxiVideo MV108S 8.5mm Digital Inspection Camera support All System Diagnostics, FCA Auto Auth, ABS Bleed, Injector Coding, Immo key coding. Global Version Autel MaxiCOM MK808Z BT Full System Diagnostic Tablet With 40 Special Service Reset Functions Also Support IMMO Key Coding Update From MaxiCOM MK808/MX808. CheShiTech.com Autel MaxiCOM MK808Z MK808S Car Diagnostic Scan Tool Autel Scanner Maxicom MK808Z BT Global version no IP Limit Support Android 11 System Add Australian brands, Ford and Holden without extra license.

2024 Autel MaxiCOM MK808Z MK808S Bi-Directional Diagnostic Scanner Global Version Autel MaxiCOM MK808Z BT Full System Diagnostic Tablet With 40 Special Service Reset Functions Also Support IMMO Key Coding Update From MaxiCOM MK808/MX808

CheShiTech.com Autel MaxiCOM MK808Z MK808S Car Diagnostic Scan Tool Autel Scanner Maxicom MK808Z BT Global version no IP Limit Support Android 11 System Add Australian brands, Ford and Holden without extra license

2024 Autel MaxiCOM MK808Z MK808S Bi-Directional Diagnostic Scanner Description:

2024 Upgraded of MK808/MX808 Android 11 Based Bi-Directional Control Scan Tool
All System Diagnostics, FCA Auto Auth, ABS Bleed, Injector Coding, Immo key coding
Compatible with Autel MaxiVideo MV108S 8.5mm Digital Inspection Camera

Why do you buy Autel MaxiCOM MK808Z Scan Tol from CheShiTech.com:

Autel Authorized Official Dealer
Global Version, No Area Restriction , no IP Limit with 1 Year Warranty

AUTEL MaxiCOM MK808 MK808Z MK808S Scan Tool Highlights:

Beat MK808 & MX808 in Communication Stability
Upgraded Version of MK808 with Latest Android 11 Operating System
NEW! Compatible with Autel MaxiVideo MV108S 8.5mm Digital Inspection Camera: With MV108, You can use the MK808Z to examine difficult-to-reach areas normally bidden from sight, such as engine cylinders, and small part inspections like spark plug holes, and record digital still images and videos.
NEW! Support active test and complete special functions
Supports IMMO Key Coding
40 Special Service Reset Functions
Update Online: One Year Free Update Online, 110USD/year for software subscription after 1 year
Multi-Language Supported: English is default language. It also supports German, Spanish, Portuguese, Dutch, French,Italian, Korean, Japanese, Russian, Polish, Swedish, etc.
Easy to Use: Once accessed to the Diagnostics service of MaxiCOM MK808, here are a variety of functions available including oil reset and EPB/BMS/SAS/ DPF service which are used for the safety and efficient maintenance of systems.
Cost-effective: Compared with those at similar price, this automotive diagnostic scanner supports basic IMMO functions and TPMS Service, including displaying sensor IDs from vehicle’s ECU, inputting TPMS sensor replacement IDs and registering sensors to vehicle.
Extensive Coverage: MaxiCOM MK808 works on most 1996 US-based, 2000 EU-based and newer vehicles to do the full systems diagnoses including reading/clearing codes and viewing live data to check the health status of parts.
User-Friendly: This is a tablet diagnostic scanner with 7＂touchable screen and enables sensitive response with fast quad-core process; Moreover, with Wi-Fi connection there is no USB or card reader needed for updating software (one-touch updates)
Add Australian brands, Ford and Holden without extra license

Global Version Autel MaxiCOM MK808Z Diagnostic Scanner Notice:

1. Can Not Support TPMS Relearn/ Programming, If You Need It, Please Check Autel MP808TS or Autel TS508
2. The Key Fob Programming is Designed for Asian Vehicles That Have Low-Grade Anti-Theft Systems and NOT Intended for AUDI, Benz, BMW, VW which Have Advanced IMMO Systems. If you need IMMO function, please check Autel IM508/AUTEL IM608 PRO Professional Key Programming Tool.

Autel MaxiCOM MK808Z MK808S Bi-Directional Diagnostic Scanner Global Version Features:

NEW! Compatible with Videoscope
NEW! Support active test and complete special functions
Read/clear codes for all available systems
Display live data in text, graph & analog for easy data review
Auto VIN technology can automatically identify the vehicle’s make, model and year information in no time
Relearn parking brake pad after replacement
Support IMMO functions
Support forced DPF regeneration and adjusting injectors
Reset Steering Angle Sensor (SAS)
Reset service mileage and service intervals
Support TPMS sensor relearn
Support battery registration and reset

Global Version Autel MaxiCOM MK808Z BT Full System Diagnostic Tablet New Functions

AutoAuth Access: Bypass SGM in FCA Vehicles

Autel MaxiCOM MK808Z allow direct access to the security gateway module on 2018 and later Fiat Chrysler vehicles,so that the diagnostic tool can perform easier full diagnostics, run bi-directional active tests, actuations, relearns or even IMMO key programming (pulls PIN & write), ADAS calibration assistance etc.

Digital Inspection: Work with MV108

The Digital Inspection application configures the MaxiCOM Diagnostics Device to operate as a digital video scope by simply connecting the tablet to a Digital Inspection Camera. This function allows you to examine difficult-to-reach areas normally hidden from sight, with the ability to record digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure in a safe and quick way [Jan. 2024] Adds Russian car brands for free (provide device serial number to add following brands)

Autel MaxiCOM MK808Z MK808S Bi-Directional Diagnostic Scanner Package List:

1pc x MK808Z MK808S Android Pad
1pc x USB External Power Adapter
1pc x User Manual
1pc x Quick Reference Guide
1pc x Main cable
1pc x Carry case
1pc x Mini USB Cable

Autel MaxiCOM MK808S/MK808Z Description:

Autel MaxiCOM MK808Z is the most cost-worthy Autel scanner up to date, integrates Bi-directional Control, Complete Special Functions, 40+ Services, All system Diagnostics, Digital Inspection, Auto Auth, IMMO Functions, Battery Registration and Reset and etc. Along with intuitive user interface & ultra-portability, MK808Z is the perfect companion for DIYers & reparir workshop.

Autel MK808Z is the upgraded version of Autel Scanner MaxiCOM MK808 and has been fully upgraded in terms of hardware configuration

1. Operating system move on to Android 11 from Android 4.4.
2. Upgraded 8-core ROCKCHIP RK3566 Processor replacing old ROCKCHIP RK3188 Processor.
3. 4GB/64GB Expanded Storage.
4. Dual Frequency 2.4/5.0GHZ Wi-Fi.
5. Optimazed newest Software version. No need to upgrade to get new added functions such as bi-directional control, Digital Inspection, special functions and FCA Auto Auth.

Conclusion: Thanks to these upgrade, Autel MK808Z fix running latency problem, low response, network unstable problem and other problems that frequently happened in the old MK808/MX808/MP808. Autel MK808Z not only offers more intuitive naviagtion interface, but aslo enhanced the running & response speed by 3 times.

Autel MK808S Scanner Function:

[Full Systems Diagnoses]

Read and erase codes for all available systems using the supported protocols. The tablet type MaxiCOM diagnostic tool is the best way to display live data in text, graph & analog for easy data review

To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

To diagnose Fuel system if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;

To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;

To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;

To diagnose Light System if you see rapid signal blinking or dimming lights.

And many more …

[Bi-Directional Control] Same As MP808/MP808K/MP808BT !

Autel MK808Z now support “Active test” (BI-Directional Control) on various module actuators for more instant & accurate diagnosis, which is now in the same level as Autel Scanner MP808/MP808K/MP808BT, but cost you 300 bucks less. This functions is now accssible out of box and does not require any extra updates.

[40 Hot Service Functions]

Autel Scanner MaxiCOM MK808(Z) supports initial adaptation, self-learning or some auto detection function with many procedures that the vehicle is performed after maintenance or reset is done or some related component in electronic control system is replaced, such as Crankshaft Position Sensor Learn Oil Reset: Turn off the oil light, and reset the service mileage. So you won’t forget to change the oil when it’s due.
EPB: Remind you to reset the brake pad, especially if you have replaced it.
TPMS: Read TPMS data and point out issues related if there are any.
BMS: Reset a battery after you have replaced it.
Brake Bleed: Keep the tires from locking up immediately when there are brakes.
DPF: Help you clear the blockage in the DPF filter, to meet emission standards.
Immo Keys: This function is mainly used to disable the lost vehicle keys, and create a new replacement key fob, to protect your car from being stolen.
Injector: Read injector related problems and adjusts them.
SAS: Calibrating and resetting the position of the steering is just a click away.
And Injector coding, Suspension, Throttle, WIN DR ROOF, Seats, Odometer, Lang Change, Headlamp, CHG Tire Zize,TEC Learn, Trans Adaption are all avaiable.
There are a lot more functions waiting for you to explore.

New 7 Added Functions in BMW 4.0 Software:

transport mode, high-voltage battery, cruise calibration, air conditioning learning, rain light sensor, EGR self-learning, and FRM reset; Adds basic functions and special functions for models with 4 types of chassis including G22 and G82.

[Complete OBD2 functions]

Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

[Global Vehicle Coverage]

Supports many US cars after 1992, EU cars after 2002, Asia cars after 2008

– Europe:

Benz, Sprinter, BMW, Fiat, LandRover, Maserati, Opel, Peugeot, Porsche, Lancia, LT3, Maybach, Mini, Seat, Skoda, Vauxhall, Volkswagen CV, Renault, Saab, Smart, Volvo, Volkswagen, Abarth, Alfa, Audi, Bentley, Bugatti, Citroen, Dacia, Ford, Jaguar, Lambor Ghini

– Asia:

Acura, Daewoo, Daihatsu, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Maruti Suzuki, Mazda, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota, GTR, Scion

– America:

Chrysler, Ford, GM, Dodge, Jeep

[Additional Features]

SHOP MANAGER – You can well manage the workshop information with 3 available functions within this application: Vehicle History, Workshop Information, and Customer Manager. Intuitively look up the summarized details.

DATA MANAGER – The best solution for the data related operations, you can store, print, and review the saved files in Image, PDF，Review Data, Apps Uninstall or Data Logging.

REMOTE DESK – you can directly get ad-hoc remote support from Autel via Team Viewer software.

The Autel MaxiCOM MK808 is made for someone who is fairly serious about cars, because it is designed with user-friendly operational features, which you cannot find in normal handheld basic OBD2 tools.

– If you are a mechanic shop owner, the Shop Manager will keep all your customer information, data files, and vehicle records well-organized.
– If you are a car hobbyist that works on cars a lot, this scanner would also probably be worth your money to get. The Data Manager opens the organization system for saved data files.

Language Switching Service & No IP Restriction

Autel MK808Z is designed to service global users with different language background and this is reason why it offer various language options. The default language of this device is English. It can now support up to 15 languages: English, Spanish, French, German, Russian, Italian, Portuguese, Japanese, Korean, Chinese, Swedish, Dutch, Polish and etc.

Note: If you need to switch to a different language, please provide device S/N (12 digits, at the back of the device, eg: VB7GL6C0579)

NOTE:
1. Can Not Support TPMS Relearn/ Programming, If You Need It, Please Check Autel MP808TS or Autel TS508
2. The Key Fob Programming is Designed for Asian Vehicles That Have Low-Grade Anti-Theft Systems and NOT Intended for AUDI, Benz, BMW, VW which Have Advanced IMMO Systems. If you need IMMO function, please check Autel IM508/ AUTEL IM608 PRO Professional Key Programming Tool.

Autel MaxiCOM MK808Z MK808S Specifications:

Autel MP808TS vs MP808 vs MK808TS vs MK808

Autel
	MP808TS	MP808	MK808TS	MK808
RAM	1G	1G	1G	1G
ROM	32G	32G	32G	32G
battery capacity	5000 mAh	5000 mAh	5000 mAh	3200mAh
Android version	Android 4.4.2	Android 4.4.4	Android 4.4.2	Android 4.4.4
Screen size	7inch	7inch	7inch	7inch
Screen resolution	1024×600	1024×600	1024×600	1024×600
Wi-Fi	2.4 & 5 GHz	2.4 & 5 GHz	2.4 GHz	2.4 GHz
Net Weight	0.885kg	0.788kg	0.885kg	0.788kg
Remote Desk	√	√	√	√
Connection	VCI Mini / Bluetooth	main cable	VCI Mini / Bluetooth	main cable
Auto VIN	√	√	√	√
Auto SCAN	√	√	√	√
Full OBD2 Functions for All Systems	√	√	√（read/erase codes,read ECU info.,data stream）	√（read/erase codes,read ECU info.,data stream）
Commonly used Special Functions	√	√	√	√
Replacement of Control Unit for Some Software	√	√	X	X
Guidance Function	√	√	X	X
Advanced TPMS （sensor programing/activation）	√	X	√	X
Language	English, Simplified Chinese, Traditional Chinese, Spanish,French, German, Polish, Italian, Japanese, Korean, Dutch,Portuguese, Swedish,Russian