GODIAG ECU GPT Boot And Programming Adapter GODIAG ECU GPT Boot AD ECU Connector for ECU Reading Writing No Need Disassembly Compatible with J2534/ Openport/PCMFlash/ FoxFlash/FC200

描述

GODIAG ECU GPT Boot And Programming Adapter Work with J2534 devices and PCMFLash software. GODIAG ECU GPT Boot AD ECU Connector for ECU Reading Writing No Need Disassembly Compatible with J2534/ Openport/PCMFlash/ FoxFlash/FC200. CheShiTech.com GODIAG ECU GPT Boot AD Programming Adapter GODIAG ECU GPT Boot AD Connector read and write ECU data without disassembling the ECU.

GODIAG ECU GPT Boot And Programming Adapter GODIAG ECU GPT Boot AD ECU Connector for ECU Reading Writing No Need Disassembly Compatible with J2534/ Openport/PCMFlash/ FoxFlash/FC200

CheShiTech.com GODIAG ECU GPT Boot AD Programming Adapter GODIAG ECU GPT Boot AD Connector read and write ECU data without disassembling the ECU

GODIAG ECU GPT Boot And Programming Adapter Introduction:

GODIAG ECU GPT Boot AD programming adapter can help you read and write ECU data without disassembling the ECU using the OBD2 Bench or GTP Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. You can use it with J2534 devices and PCMFLash software.

GODIAG ECU GPT Boot And Programming Adapter Features:

1. ECU dedicated connection terminal.

2. Support manual ignition power control

3. The ECU interface cable is labeled

4. Support ECU conversion to OBD2 mode to read and write data

5. Support RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND.

6. Support PCMFlash automatic control of ignition power supply

7. Support ECU opening BOOT method to read and write data

8. CANbus is equipped with a switch to freely select the 120Ω resistor

9. Support GPT to read and write data without disassembling the ECU.

10. Equipped with BOOT resistance board connecting cable [anti-lost resistor design]

Check ECU OBD2 GPT Boot PINout (contains 4000+ pinouts)

Godiag GPT Bench Boot Cable Functions:

The diagnostic function supports standard OBD2 protocol equipment.

Supports ECU reading and writing data, and supports J2534 devices.

Only Scanmatik 2 PRO for PCMflash allows to form GPT1, and GPT2 signals necessary to work with Module 71.

Other devices Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR,

Teradyne GNA600 (VCM 1), and Mazda VCM 2 support OBD2 or BOOT 53 mode to read and write ECU data.

Connection Method of GODIAG ECU GPT Boot AD programming adapter, J2534 device, and PCMFlash dongle software.

J2534 device	Connection method	PCMFlash dongle software	Advantages
			easy, convenient and save money
			Convenient to observe communication status, current and voltage, and other working status

Connection example with OBDSTAR DC706

You can clone many ECMs with DC706 and godiag GPT adapter.

For example 8GMW works when connected with Godiag, or thru the pins on P004. You can use the godiag breakout harness instead of p004, it is much easier this way. It also has the 120ohm built in.

You can also use the GPT adapter with Xhorse Multi Prog to read engine ECUs, i.e ME17.8.8, MED17.5. To use this adapter with Multi prog, you also need a G-V ECU converter.

The GPT Adapter can be used with Autel IM608/IM508 + Gbox2/3 as well. You also need a Godiag G-A ECU cable converter.

GODIAG ECU GPT Boot AD ECU Connector Comparison:

GODIAG ECU GPT Boot AD Connector Package Includes:

1pc x GODIAG ECU GPT Boot AD Programming Adapter

CheShiTech.com— China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: https://www.cheshitech.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp/Wechat: +86-19870637508/+86-13691674080
https://api.whatsapp.com/send?phone=8619870637508
https://api.whatsapp.com/send?phone=8613691674080