Hantek HK-50 50Ω Impedance Adapter Hantek HK-50 50 OHM Impedance Adapter For Oscilloscopes with BNC connectors Converts 1 MΩ to 50 Ω for accurate measurements

描述

Hantek HK-50 50Ω Impedance Adapter Supports signals from DC to 1 GHz. Hantek HK-50 50 OHM Impedance Adapter For Oscilloscopes with BNC connectors Converts 1 MΩ to 50 Ω for accurate measurements. CheShiTech.com Hantek Through Type Load Impedance Adapter HK-50 50Ω 1W With Universal interface types And Wider frequency band.

Hantek HK-50 50Ω Impedance Adapter Hantek HK-50 50 OHM Impedance Adapter For Oscilloscopes with BNC connectors Converts 1 MΩ to 50 Ω for accurate measurements

CheShiTech.com Hantek Through Type Load Impedance Adapter HK-50 50Ω 1W With Universal interface types And Wider frequency band

50Ω Impedance Adapter HK-50 Details:

The HK-50 is a through type impedance adapter (1W, 1GHz) with BNC connectors. Used to match the impedance of a signal source to the input impedance of a test instrument, such as oscilloscopes and generators. It can convert a high-impedance (1 MΩ) oscilloscope input to a 50Ω load. It is essential for ensuring accurate signal measurements by preventing reflections and signal loss caused by mismatched impedances.

Hantek HK-50 50Ω Impedance Adapter Features：

Input power：1 Watt.
Broadband performance: Supports signals from DC to 1 GHz.
Seamless impedance matching: Converts 1 MΩ to 50 Ω for accurate measurements.
Universal connectivity: BNC connectors (male and female).
Applications：
Oscilloscope measurements: To connect a 50 Ω transmission cable to an oscilloscope with 1MΩ impedance input channels, you must use a 50 Ω impedance adaptor acts as a terminator that absorbs the signal energy to match the impedance and prevent reflections distorting the signal and leading to inaccurate measurements.
Probe Integration: Enables seamless connection with high-impedance current probes, differential probes, and Rogowski coils to ensure proper signal adaptation.
Universal impedance matching: Ideal load resistor for impedance matching between a circuit or device port and the standard 50Ω impedance.

Hantek HK-50 50 OHM Impedance Adapter For Oscilloscopes Excellent S11 test curve:

Low VSWR (Voltage Standing Wave Ratio) across the frequency range.
High return loss: > -25dB, an excellent impedance match between two connected devices.
Lowe reflection: very little power (approximately 0.2%) is reflected back, while 99.8% of the power is transmitted forward.

CheShiTech.com— China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: https://www.cheshitech.com
Email: chinaobd2store@gmail.com
Whatapp/Wechat: +86-19870637508/+86-13691674080
https://api.whatsapp.com/send?phone=8619870637508
https://api.whatsapp.com/send?phone=8613691674080