Wifi VNCI 6154A ODIS V23.01 is Auid VW ODIS Tool Features No Need To Replace The Orignal Driver. VNCI 6154A VAG Diagnostic Tool Audi VW ODIS VNCI 6154A VCI Clone Replaces VAS 6154A Supports DoIP/CAN FD Protocol for VW Audi Skoda Seat till 2023. CheShiTech.com Doip VNCI 6154A professional vw/audi scan tool Wifi VNCI 6154A ODIS VW Group Diagnostic Tool Work With ODIS Latest Version V23.01, ODIS Engineering 17.0.1 Download And V2.5 VNCI 6154A Device Manager.
Wifi VNCI 6154A ODIS V23.01 VNCI 6154A VAG Diagnostic Tool Audi VW ODIS VNCI 6154A VCI Clone Replaces VAS 6154A Supports DoIP/CAN FD Protocol for VW Audi Skoda Seat till 2023
CheShiTech.com Doip VNCI 6154A professional vw/audi scan tool Wifi VNCI 6154A ODIS VW Group Diagnostic Tool Work With ODIS Latest Version V23.01, ODIS Engineering 17.0.1 Download And V2.5 VNCI 6154A Device Manager
V23.01 VW ODIS Software Download
ODIS Engineering V17.o1 download (ODIS 23.01 keygen not included, $5 for activation)
V2.5 VNCI 6154A Device Manager Download
New Type VNCI 6154A ODIS (Red VNCI 6154A VCI) Fixed some bugs:
1.Fixed that Interface heats up after long time use (lost firmware)
2.Fully Supported CAN FD and Doip protocols
3.Compatible with Oiginal ODI-S all versions driver(Old 6154 only compatible with Original V24 ODI-S Driver)
4.Upgrade to support ODIS-S 9.1/10.0/V11.0 and ODIS-E V14.1/V15.1/V16
5.Directly use with ODI-S and no need Driver Manager
Why should we choose VNCI 6154A VAG Diagnostic Tool?
1. DOIP 6154 can supports DOIP diagnosis, especially it can do 2018 to 2023 new cars,
2. DOIP 6154 supports more protocols than the old 6154.
Audi VW ODIS VNCI 6154A VCI Covered models:
Volkswagen: 1995Y-2023MY+
Audi: 1995MY-2023MY+
Seat: 1995MY-2023MY+
Skoda: 1995Y-2023MY+
Bentley: 1995MY-2023MY+
Lamborghini: 1995MY-2023MY+
MAN: 1995MY-2023MY+
What is the difference between the NEW 6154 DOIP Version and the normal 6154:
DOIP 6154 can support DOIP diagnosis, especially it can do 2018 to 2020 new cars,
DOIP 6154 supports more protocols (CAN FD and DoIP) than the old 6154.
You don’t need any program or manager to run this VCI.
The VCI loads the firmware very stable.
It works with WLAN and also with USB.
VNCI 6154A ODIS V23.01 Description:
With 2-year hardware warranty
Supports WIFI, USB and WLAN Connection.
VNCI 6154A Work with original driver, Don’t need driver manager.
Replace VAS 6154a, Works for all VAG Brands from 1995 to 2023.
What is VNCI 6154A ODIS V23.01?
VNCI 6154A (red SVCI 6154A) is the OEM 6154A Diagnostic Adapter that is compatible with lastest service software.
It perfectly replaces VAS 5054A /VAS 6154A and added supports CANFD, and DOIP Protocol. VNCI 6154A is a universal diagnostic interface for the vehicles of the Volkswagen Group including VW, AUDI, SKODA, SEAT, Bentley, and Lamborghini.
VNCI 6154A ODIS V23.01 Features:
With base station/hotspot mode switching button.
Free license until 2030 year
Works for all VAG Brands from 1995 to 2023
Supports WiFi, WLAN and USB Connection
Supports Win10/Win11 64bit systems.
FULL Multilanguage edition covered 22 languages: English (GB), English (US), French (FR), German (DE), Spanish(ES), Russian (RU), Greek (GR), Danish (DK), Croatian (HR), Italian (I), Hungarian (HU), Netherlands (NL), Polish(PL), Portugal (PT), Romanian (RO), Slovenian (SLO), Finish (FI), Swedish (SW), Turkish (TR), Czech (CZ), Japanese(JP), Chinese (CN), Korean (KO).
Compatible with Service V9.1.0, V10.0, V11.0, V23; Engineering: V14.1/V15.0/V16.0/ V17
Supports Online/Offline programming (with online account)
Flashing of hidden features
Support all service and engineer function
Not need any license for VNCI. Use normal installation with launcher. Running original drivers without any modifications.
Compatible with latest Service V23 and Engineering V17 after firmware upgrade
VNCI 6154A Driver Download: rokwy.com/download/VNCI6154ADevMngrSetup.exe
V10 Download Password: 6vi5ku
V11 Download/ Engineering V14 Download
V23.01 VW ODIS Software Download and ODIS Engineering V17.o1 download (ODIS 23.01 keygen not included, $5 for activation)
V2.5 VNCI 6154A Device Manager Free Download
System Requirements:
Windows10 64-bit professional edition
4GB of memory
At least 100GB of free space on the C driver
WIFI Password: 12345678
| Product | Vehicle tested | ECU model | Protocol | ODIS-S 11 | ODIS-S 23.0.1 | ODIS-E 17.01 |
| VNCI 6154A
|
2007 AUDI A6 | MED9.1 | KWP2000 | √ | √ | √ |
| 2005 VW Caddy | EDC16U1 | KWP2000 | √ | √ | √ | |
| 2007 VW Passat | CAN BUS | √ | √ | √ | ||
| 2017 VW Passat | SIMOS 18.3 | CAN BUS | √ | √ | √ | |
| 2008 Audi A6 | SIMOS 6.22A | CAN BUS | √ | √ | √ | |
| 2008 VW Passat | MED17.5 | CAN BUS | √ | X (Support OBD Scan) | √ | |
| 2008 AUDI A6 | SIMOS 8.10 | CAN BUS | X | X | √ |
VNCI 6154A ODIS V23.01 Functions:
automatic recognition of the communication mode with the vehicle
reading and decoding fault codes
erasing errors
viewing current parameters in digital (up to 8) or graphic (up to 6) form
activation of actuators
adaptation of blocks and executive units
coding of electronic components
restoring basic settings mode
special test modes (cylinder balance, etc.)
ability to save and print received data
automatic scanning of all electronic components of the car with the output of a summary report
injection system diagnostics
fuel system diagnostics
performing service procedures
Control unit software update
Online function
Flashing of hidden features
Coding and programming
Covering most of the models under Volkswagen Group’s automotive brands
Support service v9.10/v10.0/v11.0+
Support Engineer v14.1/v15.0/v16.0+
100% Support DoIP protocol
100% Support CAN FD protocol
Support KWP2000/UDS/CAN/K-Line……etc protocol
100% support all protocols
Vehicle diagnosis
Online/Offline programming
Flashing of hidden features
Support all service and engineer function
VNCI 6154A Update Log:
VNCI 6154A firmware update to 1.1.2.4
Fix bug: Failed to activate OCU module(J949)
VNCI 6154A Firmware Update to V1.1.2.2
Fixed: VW ID3/ID4/ID6 cannot refresh the battery monitoring control module (0637)
VNCI 6154 Manager update to V2.5
Firmware update to 1.1.1.4
(1) Solve the problem that individual data streams are not displayed when the TP20 protocol reads multiple data streams.
(2) Solve the problem of freezing when the web page is refreshed multiple times.
NOTE:
1.PLEASE INSTALL ON WINDOWS 10(64BIT) AND MAKE SURE YOUR C:/ DRIVER is with 50GB SPACE .
2. SVCI 6154A is not a J2534 Passthru because it loaded with a newer version of Firmware.
3. Compatible with odis latest version
Connection
Three connection methods to adapt to various scenarios: USB connection mode, AP direct connection mode, Base station connection mode.
USB connection mode: connect VNCI 6154A with computer via USB cable
AP(WIFI) connection mode: Power to VNCI 6154A through the OBD port, and then connect VNCI 6154A with computer via device WIFI, similar to Bluetooth connection
Base station(WLAN ) connection mode: Add VNCI 6154A and current computer to the current WLAN, and then power to
VNCI 6154A through the OBD port.
VNCI 6154A ODIS Features:
– Estimated remaining times are shown for ECU flash operations.
– Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view, used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used, and submissions of support requests
– The measured value display has been improved.
– Documents in GFF are displayed in separate windows.
– One message box will be shown at the beginning of the test drive mode.
– GFF hotfixes can be integrated during diagnostic sessions.
– Danger messages have been revised.
– Stopping diagnostic sessions may be interrupted.
– Automatic deletion of autosave diagnostic protocols after successful transmission.
– Selection of PassThru diagnostic hardware has been improved.
– Service Software update has been stabilized.
The Following Vehicle Bus Systems are Supported
K line (ISO9141-2)
High-speed CAN (ISO 11898-2)
Low-speed CAN (ISO 11898-3)
J1850 (SAE)
LED light instructions:
Orange: Mode
Green: Power
Red: DoIP communication
Blue: Connection status
Button: AP connect mode and Station connect mode switch button
Adapter pinout:
Pin1: Terminator 15
Pin2:Not Connect
Pin3: DolP Rx+
Pin4: Terminator 31
Pin5: Terminator 31
Pin6: CAN HS-H
Pin7:K-Line
Pin8: DolP activate/CAN LS-H
Pin9: CAN LS-L
Pin10:Not Connect
Pin11: DolP Rx
Pin12: DoIP Tx+
Pin13: DoIP Tx
Pin14: CAN HS-L
Pin15: L-Line
Pin16: Terminator 30
Usage recommendation:
The original service or engineer software must be installed original software
The original driver can not be replaced, and the third-party driver can not be installed
Computer System requirements:
Windows 10 64-bit professional edition 4GB of memory
At least 100GB of free space on the C driver
VNCI 6154A power supply methods:
OBD port 12 power supply
USB port 5v power supply
VNCI 6154 Vag Packing List
1x VNCI 6154 Diagnosis Head
1x USB cable
1pc x Paper Box
Reviews
There are no reviews yet.