V5.3.3 Xhorse VVDI PROG Programmer support read and write EEPROM data files, flash (program and data) memory and MCUs. Original Xhorse VVDI PROG Eeprom Programmer Get Free BMW ISN Read Function and NEC, MPC, Infineon etc Chip Continuously Update Service. CheShiTech.com Original Xhorse VVDI Prog Super ECU Programmer With Xhorse VVDI Prog V5.3.3 Software And V2.0.0 Firmware with vvdi prog connection diagram.
V5.3.3 Xhorse VVDI PROG Programmer Original Xhorse VVDI PROG Eeprom Programmer Get Free BMW ISN Read Function and NEC, MPC, Infineon etc Chip Continuously Update Service
CheShiTech.com Original Xhorse VVDI Prog Super ECU Programmer With Xhorse VVDI Prog V5.3.3 Software And V2.0.0 Firmware with vvdi prog connection diagram
VVDI Prog allows you to read and write EEPROM data files, flash (program and data) memory and MCUs and save them in the software application.
You can then import the saved files into your transponder programming device (Tango, VVDI2, Miraclone etc.) and use them to program transponders or to read the immo code.
V5.3.3 Xhorse VVDI PROG Programmer Notice:
1. Do Not click firmware upgrade in VVDI Prog software, or it will give communication server error. The firmware is fixed at 2.0 version, no need to update.
2. Please do wiring 100% same like the connection diagram in VVDI Prog software, DO NOT lengthen the connection lines with other parts. Or will fail to read.
3. Voltage require: 12V/3-5A
Highlight of V5.3.3 Xhorse VVDI PROG Programmer:
1. Multi-languages: English, Arabic, Czech, French, Italian, Polish, Portuguese, Russian, Spanish, Turkish, Chinese
2. Newest software: V5.3.3
Xhorse VVDI Prog V5.3.3 Software download
3. Get Free BMW ISN Read Function and NEC, MPC, Infineon etc Chip Continuously Update Service
4. VVDI Prog =BMW ISN reading +EERPOM reading+mcu reading, MOTO 9S12, 5M48****+PIN Code Calculation(more pin coder Algorithm, than 40 type)
5. Support VAG EDC17 and BMW ECU
6. VVDI Prog wiring diagram is available free for all supported models in the VVDI Prog Software wiring diagram
7. Newly Add BMW Bosch Adapter functions, support Reading ISN from BMW ECU N20 N55 N38, but need to buy VVDI Prog Bosch ECU Adapter.
8. Support R & W lots of chips, include MC9S08 series, MC68HC(9)12 series, MC9S12 series, V850 series, H8X series, R8C series, PCF79XX series and most eeprom chips
9. OS system: Windows XP/Vista/7/8/8.1/10
Tips on using V5.3.3 Xhorse VVDI PROG Programmer:
1. As the software update at a high frequency, so that we cancel the CD in the package, sorry for this. But do not worry, we will send you the download link when you place an order, or you can contact me for the newest version, Hope you can understand that!
2. Please do wiring 100% same like the connection diagram in VVDI Prog software, DO NOT lengthen the connection lines with other parts. Or will fail to read.
3. Xhorse VVDI Prog is just an MCU reader & writer and it doesn’t program transponder or smart keys
4. Xhorse VVDI Prog is totally free of tokens and it doesn’t require any additional software purchasing
How to Do V5.3.3 Xhorse VVDI PROG Programmer Update Online
1. This function require internet support, Connect the device with the USB wire for the computer
2. Click the “Upgrade” button enter the upgrade interface, show as following picture
Enter update interface, if software show ”communication with server failed”,
please close your Anti-virus and computer firewall and retry. If software
show “unable to find equipment”, please reconnect device
Tip information show the latest software version and upgrade information
Device information show the device SN, device firmware version and the
latest firmware version
Firmware upgrade steps:
1. Select the firmware version
2. Click “Start Firmware Upgrade” button
3. Don’t close or pull out USB cable before upgrade finished
Software upgrade steps:
1. Click “Software Link 1” or “Software Link 2” button, download software
from the web
2. Extract the file
VVDI Prog Main Features:
1) The built-in update software allows user to update VVDIProg firmware timely.
2) High-speed USB communication interface enable the software automatically connect.
3) Smart operation mode: the possible causes of error will be listed
4) Reserve ports: for future update.
5) The self-test function enable you check if the machine works well.
6) Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
V5.3.3 Xhorse VVDI PROG Programmer Functions:
Support R&W lots of chips, include MC9S08 series, MC68HC(9)12 series, MC9S12 series, V850 series, H8X series, R8C series, PCF79X series
and most eeprom chips etc . u Sup ort chip dat verify, check blank function
Support data file compare function
Support R&W BMW N20, N5 ECU(show ISN directly)
Stable R&W MC9S12XE series chips (5M48H/1N35H/2M53J/ M25J etc.)
Support renew PCF79XX remote, currently support BMW E/F series
Lots of conection diagram
VVDI Prog Adapters Detailed Description
16pin locking socket
Read EEPROM chips Use method: Follow the image direction when insert the DIP chip (PIN1 as yellow point show as the picture);
SOP chip need soldering on 16Pin adaptor first, then insert the chip follow the image direction
MCU Reflash Cable
Function: Read & Write MC68HC(9)12, V850, H8X, R5C series chips,current version is V2
Use method: Soldering the line on pin of chip before read & write
Notes:
(1) Please check all connection lines,ensure correct and reliable connection
(2) Please Don’t lengthen CLK and GND-C line, maybe cause read data failed.
ECU Reflash cable
Function: Read & Write engine ECU
Use method: Connect the ECU and R&W
Notes: Please check all connection lines, ensure correct and reliable connection
MC9S12 Reflash cable
Function: Read & Write MC9S08, MC9S12 series chips, current version is V1
Use method: Soldering the line on pin of chip before read & write
Notes:
(1) Please check all connection lines,ensure correct and reliable connection.
(2) Please Don’t lengthen CLK and GND-C line, maybe cause read data failed.
VVDI Prog Latest Update Information:
Xhorse VVDI Prog V5.3.3 (2024-01-24):
This version DON’t need update firmware
VVDI Prog V5.3.3 Software Free Download
Some ECU options process optimization
Land Rover RFA Adapter options process optimization
RH850 series Some options wiring diagram updated
Modify LOCK_BCM2 options in
<4-IMMOBILIZER>->:
Erasing failure repair and
prompt message modification
Modify CAVALIER(2018)
option in
<7-AIRBAG>->:
Wiring diagram update
Modify LITHIUM BATTERY MODULE
option in
<8-OTHER>->:
Wiring diagram update
VVDI Prog V5.3.2 (2023-12-11)
This version DON’t need update firmware
Optimization of ISN calculation for some ECU modules.
VW MQB dashboard process optimization.
BMW CAS4, Porsche BCM, Land Rover RFA options adapter detected illegal repair
Modify ENGINE-341
option in <3-ECU>->:
Optimize the process and Wiring diagram update.
Modify PIC12F1822 option in <2-MCU>->: Wiring diagram update.
Modify XINGMA 315
option in <8-OTHER>->:
Optimize the process and
Wiring diagram update.
Modify QILIN VH
option in <8-OTHER>->:
Optimize the process and
Wiring diagram update.
Modify YingJie 500 315,
ZhuHong 500 315
option in <8-OTHER>->:
Optimize the process.
VVDI Prog V5.3.1 (2023-09-27)
This version DON’t need update firmware
+ Add M68HC805P18(H44H),
M68HC805P18(K05Y),
MC68HC05P18(1F52W),
MC68HC805P18(0G64R),
MC68HC805P18(G64R),
XC68HC805P18(G04R)
options in
<2-MCU>->
+ Add RENEGADE BCM(2017)(R7F701034),
RENEGADE BCM(R7F701056)
options in <4-IMMOBILIZER>->
+ Add
Beetile(D70F3524)-READ(WELD),
Beetile(D70F3524)-WRITE(WELD)
options in
<5-DASHBOARD>->
+ Add VIAGGIO SMARTBOX
option in <8-OTHER>->
+ Add HA_MA S7
option in <8-OTHER>->
VVDI Prog V5.3.0 (2023-08-30)
* This version DON’t need update firmware
* Modify GL8 BCM(2017–)-WRITE,
option in <4-IMMOBILIZER>->:
Optimize the process
Add FENGSHEN S30(93C46A)
option in
<8-OTHER>->
VVDI Prog V5.2.9 (2023-07-04)
* This version DON’t need update firmware
* Modify GL8 BCM(2017–)-READ,
GL8 BCM(2017–)-WRITE,
options in
<5-DASHBOARD>->:
Optimize the process
* Modify HOWO A7,
HOWO SITRAK 2083,
HOWO T5,
HOWO T5H,
HOWO T7H,
HOWO TX,
Sino Trunk2083,
SITRAK 6011,
SITRAK 6021,
SITRAK C5H SQUARE REMOTE,
SITRAK C7H,
SITRAK C7H B5,
SITRAK RHOMBUS REMOTE,
SITRAK T7H
options in
<8-OTHER>->:
Optimize the process
+ Add XINGMA 315
option in
<8-OTHER>->
+ Add QILIN VH
option in
<8-OTHER>->
+ Add SITRAK C7H 540
option in
<8-OTHER>->
VVDI Prog V5.2.8 (2023-05-31)
This version DON’t need update firmware
Modify MQB-LOCK(D70F35xx)-WRITE, VW-4th-NEC35XX-WRITE, options in <5-DASHBOARD>->:
Optimize the process
+ Add GL8 BCM(2017–)-READ,
GL8 BCM(2017–)-WRITE
options in
<4-IMMOBILIZER>->
+ Add Rover 2017 BCM(MPC5746G),
Rover 2017 BCM(MPC5748G)
options in
<4-IMMOBILIZER>->
+ Add SPECIAL CV(R5F2138A)(2018)
option in
<5-DASHBOARD>->
+ Add EXCELLE SRS(XC2336A-72)(2015)
option in <7-AIRBAG>->
+ Add BENZ W207 REAR MODULE
option in
<8-OTHER>->
+ Add ROVER-SHIFT-GEAR-MODULE,
RANGE-ROVER-SEAT-MODULE2
options in
<8-OTHER>->
+ Add ROEWE-I6-ESL(SPC5602D)(2018)
option in
<8-OTHER>->
+ Add BLADE KEY(2018-2021),
SMART KEY MOUDLE(2018-2021)
options in
<8-OTHER>->
+ Add Creta/Alcazar SMART KEY MOUDLE,
I10/I20 SMART KEY MOUDLE
options in
<8-OTHER>->
VVDI Prog V5.2.7 (2023-04-18)
This version DON’t need update firmware
Add MB91F53BC option in <2-MCU>->
Add XC2361E-136 option in <2-MCU>->
Add SPC5602D option in <2-MCU>->
Add MQB-LOCK(D70F35xx)-READ, MQB-LOCK(D70F35xx)-WRITE, VW-4th-NEC35XX-READ, VW-4th-NEC35XX-WRITE, options in 5-DASHBOARD>->
VVDI PROG V5.2.6
This version don’t need update firmware
1. The software added the function of saving read data to temporary file if read data fails.
2. Modify MQB-LOCK(D70F35xx)
option in <5-DASHBOARD>->:
Optimize the process and Wiring diagram update.
VVDI Prog v5.2.4 (2023-02-01)
* This version DON’t need update firmware
+ Add YingJie 500 315, ZhuHong 500 315 options in <8-OTHER>->
+ Add ROEWE EPS(D70F3506) option in <8-OTHER>->
+ Add Telsa battery(MM9Z1J638) option in <8-OTHER>->
+ Add HOWO A7, HOWO SITRAK 2083, HOWO T5, HOWO T5H,
HOWO T7H, HOWO TX, Sino Trunk2083, SITRAK 6011,
SITRAK 6021, SITRAK C5H SQUARE REMOTE, SITRAK C7H, SITRAK C7H B5,
SITRAK RHOMBUS REMOTE, SITRAK T7H options in <8-OTHER>->
VVDI Prog V5.2.2 (2022-11-28)
* This version DON’t need update firmware
+ Add R5F212K2,
R5F212K4,
R5F21344,
R5F21345,
R5F21346,
R5F21364,
R5F21365,
R5F21366,
R5F21367,
R5F21368,
R5F2136A,
R5F2136C,
options in
<2-MCU>->
VVDI Prog V5.2.1 (2022-10-31)
* This version DON’t need update
firmware
* Modify M95080
option in <1-EEPROM&FLASH>->
* Modify CAMRY AC COMPUTER
option in <8-OTHER>->
+ Add MB90F952
option in
<2-MCU>->
+ Add D78F0441,
D78F0442,
D78F0443,
D78F0444,
D78F0445,
D78F0451,
D78F0452,
D78F0453,
D78F0454,
D78F0455,
D78F0461,
D78F0462,
D78F0463,
D78F0464,
D78F0465,
D78F0471,
D78F0472,
D78F0473,
D78F0474,
D78F0475,
D78F0481,
D78F0482,
D78F0483,
D78F0484,
D78F0485,
D78F0491,
D78F0492,
D78F0493,
D78F0494,
D78F0495
options in
<2-MCU>->
+ Add 39106-26810(ST10F275)
option in <3-ECU>->
+ Add FORTHING T5
option in
<5-DASHBOARD>->
+ Add ACCORD AIRBAG(SPC560P50L3)
option in <7-AIRBAG>->
+ Add ACCORD EPS(2022)
option in <8-OTHER>->
+ Add SONY1 BLUETOOTH
option in <8-OTHER>->
VVDI Prog Programmer Supported Type List:
EEPROM&Flash:
ADESTO, AKM, ALTERA, AMD, ATMEL, CATALYST, EON, EXEL, FAIRCHILD, FUJITSU, INTEL, MICROCHIP, MXIC, RAMTRON, ROHM, SEIKO, TOSHIBA, WINBOND, ⅪCoR, YMC.etc
VVDI PROG Supported List
VVDI Prog Supported Type List:
Memory:
ATMEL, CATALYST, EXEL, FAIRCHILD, INTEL, MICROCHIP, MITSUBISHI, ST, TOSHIBA, XICOR
MCU:
RENESAS V850, RENESAS H8X, RENESAS R8C, MOTOROLA MC68HC(9)08, MOTOROLA MC68HC(9)12
MOTOROLA MC9S08, MOTOROLA MC9S12, NXP PCF79XX, ST ST10F, INFINEON XC2XXX, ATMEL, ATMEGA XXXX,
INFINEON XC164CS, MICROCHIP PIC18F
VVDI Prog Support Model List:
ECU List:
BMW E Series, BMW F Series, BOMBARDIER, CHANGAN, DELPHI, MAGNETI, MARELLI, RENAULT, OTHER
IMMO List:
For AUDI, for BENZ, for BMW, for BUCIK, for CHEVROLET, for STEC, for CHRYSLER, for FIAT, for FORD, for GREATWALL, for INFINITI, for LANDROVER,
for JAGUAR, for NISSAN, for OPEL, for PORSCHE, for RENAULT, for SAICMOTOR, for VOLKSWAGEN, for ZHONGHUA.
Dashboard List:
for BUICK, for CHANGAN, for CHERY, for CHEVROLET, for DONGFENG, for FAW, for FORD, for GEELY, for GREATWALL, for HAFEI, for TOYOTA,
for HANTENG, for HAIMA, for HONDA, for JAC, for JAGUAR, for JINBEI, for JMC, for LUXGEN,for NISSAN, for SGMW, for VOLOVO, for ZHONGHUA, for ZOTYE
Remote List: For BMW E Series, for BMW F Series
2.1 EEPROM
| Manufactures | Types | Support | Remark |
| ATMEL | AT24CXX | R | |
| AT25XXX | R | ||
| AT93CX6 | R | ||
| BOSCH | B3XX | R | |
| B4XX | R | ||
| B5XX | R | ||
| B58XXX | R | ||
| CATALYST | CAT24CXX | R | |
| CAT24WXX | R | ||
| CAT93CX6[A] | R | ||
| EXEL | XL[S]24CXX | R | |
| XL[S]93CX6 | R | ||
| FAIRCHILD | FM24CXX | R | |
| NM24CXX | R | ||
| NM93CX6 | R | ||
| GRUNDIG | GRXX | R | |
| HOLTEK | HT93CX6 | R | |
| MICROCHIP | 24AAXX | R | |
| 24[L]CXX | R | ||
| 93[L]CX6 | R | ||
| 93AAX6 | R | ||
| MITSUBISHI | M6M800X1 | R | |
| SEIKO | S-24CXX | R | |
| S-93CX6 | R | ||
| ST | D80/D160 | R | Can erase the first 32 bytes |
| M35080 | R | Can erase the first 32 bytes | |
| NEC | M24CXX | R | |
| ST | ST24CXX | R | |
| ST24EXX | R | ||
| ST24WXX | R | ||
| ST25CXX | R | ||
| ST25EXX | R | ||
| ST95P0X | R |
Note: R means the type is supported, £ means the type will be supported in the future
2.2 MCU
| Manufactures | Types | Support | Remark |
| MOTOROLA | MC9S12XEP | R | Can automatically determine D-FLASH/EEE space |
| MC9S12XA | R | ||
| MC9S12XB | R | ||
| MC9S12XD | R | ||
| MC9S12XDT | R | ||
| MC9S12XDP | R | ||
| MC9S12XDQ | R | ||
| MC9S12DG | R | ||
| MC9S12DT | R | ||
| MC9S12P | R | ||
| MC9S12H | R | ||
| MC9S12HY | £ | ||
| MC9S12HA | £ | ||
| MC9S12HZ | £ | ||
| MC9S12XHZ | £ | ||
| MC9S12B | £ | ||
| MC9S12GC | £ | ||
| MC9S12XS | £ | ||
| MC9S12K | £ | ||
| MC9S12Q | £ | ||
| MC9S12C | £ | ||
| MC9S12P | £ | ||
| MC9HC(9)08 | £ | ||
| ATMEL | ATTINY | £ | |
| ATMEGEA | £ | ||
| NEC | uPD70F | £ | |
| ST | TMS370 | £ |
Note: R means the type is supported £ means the type will be supported in the future.
2.3 ECU
| Manufactures | Types | Support | Remark |
| VAG | MED17.1-TC1796 | £ | |
| MED17.11-TC1796 | £ | ||
| VAG MEG17.5-TC1766 | £ | ||
| VAG MED17.5.1-TC1796 | £ | ||
| VAG MED17.5.2-TC1767 | £ | ||
| VAG MED17.5.5-TC1766 | £ | ||
| VAG MED17.5.20-TC1766 | £ | ||
| VAG EDC17 CP14/CP20-TC1796 | £ | ||
| VAG EDC17 CP04-TC1796 | £ | ||
| VAG EDC17 C46-TC1767 | £ | ||
| VAG EDC17 CP24-TC1796 | £ | ||
| VAG EDC17 CP44-TC1797 | £ | ||
| VAG EDC17 U01-TC1766 | £ | ||
| VAG EDC17 U05-TC1796 | £ | ||
| VAG/Porsche Siemens Continental SDI 3- TC1796 |
£ | ||
| BMW | MEVD172(N55) | R | |
| MEVD172P(N20) | R | ||
| MEVD172G(N55) | R | ||
| MEVD172S(N55) | R | ||
| MEVD1724(N20) | R | ||
| MEVD1725(N13) | R | ||
| MEVD1726(N55) | R | ||
| MEVD1729(N20) | R | ||
| MEVD1728(N63/S63) |
Note: R means the type is supported £ means the type will be supported in the future.
VVDI PROG Connection for Maybach:
VVDI Prog Connection for Sprinter:
Customer Feedback on V5.3.3 Xhorse VVDI PROG Programmer:
Did a few tests today and this is what I found out.
It seems that VVDI prog reading speed is dependent on the processor speed of the computer.
CAS3 0L15Y flash read times
Centrino processor @ 1.6ghz Windows XP = 12mins
Core2 Duo processort @ 2.5ghz Windows 7 32 bit = 5 mins
i7 @ 4.4ghz Windows 7 64 bit = 2mins 30 seconds.
Other programmers do not seem to be affected by processor speed at all.
I also would of thought this was a fairly easy question to answer without me doing all the testing
Tested by me: cas 2, cas 3, cas 3+, Cas4 5m48h, volvo cem v40 all ok.
Is a very good tool and for bmw cas4 .
I tested today D80 and a m35080v6, and they work perfect.
Mine erased D160 (for BMW F01 dash) with no problem.
Tried to renew for bmw e series 868 key. Vvdi programmer claimed operation success but in tango key is now recognized as transponder type A. locked
I did renew 2 keys! Both worked and now are programmed to cars!
Only thing you need to disconnect from PCB is battery while writing the renew file. (Remove the batteries)
Renew for BMW series E 868 key – 100% OK z vvdi-prog v4.5.7
FRM3 works perfectly
More EDC17 under ECU section would be great!
Especially for BMW EDC16 and EDC17 for ISN purposes.
for BMW F series FEM module reading but for that i can only dream about…
for BMW BMSX bike ECU would be great…
Renew pcf7946 and 29f family
Renew E series remote with pcf7942 / pcf7944 would be fine
Unlock and download the 9S12G128 secure without erasing it first would be nice .
erasing all 35080s and d80 with soic clip would be super nice too!
I read the CAS3+ MCU with VVDI Prog and that worked perfect.
For BMW FRM3 series Exx – READ and WRITE – OK
For BMW KEY series Exx – OK
For BMW DashBoard 6WB 160DQWT – READ , ERASE , WRITE – OK
V5.3.3 Xhorse VVDI PROG Programmer Package including:
1pc x Programmer multiplexer
1pc x Square USB cable
1pc x SOP16 test socket
1pc x 16pin converter (Support SOP/ SOT/ SSOP)
1pc x MCU reflash cable
1pc x ECU reflash cable
1pc x MC9S12 reflash cable (Used to program MC9S12 series chip)
1pc x Plastic Package Box
Optinal cable and adapter you may need to enchane the function of your vvdi prog
| Item No. | Item Name | Function |
| SO363 | PCF79XX Adapter | lock, unlock and read/write data supported chip models: PCF7922 PCF7941 PCF7945 PCF7952 PCF7953 PCF7961 |
| SA1864 | 35160DW Chip(Replace M35160WT Adapter) | support for replacing the following chips: M35080, M35080-3, M35080-6, M35080V6, M35080VP, D80D0WQ, 160D0WQ, 35160WT |
| SO453 | Benz EZS/EIS Adapter Full Set 10PCS | for Benz EIS/EZS W164,W169,W203,W209,W211,W215,W639 and Sprinter |
| SO506 | BMW CAS4 Data Reading Adapter Cable + Clip | can prevent data loss, specialized for VVDI PROG Programmer BMW CAS4-5M48H-1N35H, easy to operation, no need disassembling, no need welding, it is a powerful data reading tool. |
| SF257 | Bosch ECU Adapter | Read BMW ECU N20 N55 B38 ISN without Opening |
| SF217-B | Land Rover KVM Adapter | Read Land Rover KVM data without Soldering |
| SK234 | EWS4 Adapter | read and write EWS4 module, no need soldering |
| SO370 | TF28xx Adapter | read Tb28fxx chip |
| SK232 | M35080/D80 Adapter | read/write and fast erase whole data |
| SK233 | EEPROM Clip Adapter | in circuit read/write eeprom chip of SOP8/DIP8 package |
| SK230 | EWS3 Adapter | read and write EWS3(0D46) module |
| SO451 | XDPG14CH MC68HC05X32(QFP64) Adapter | Read/write MC68HC05X32(QFP64 package) series chip |
| SO450 | XDPG13CH AM29FxxxB Adapter | Read/Write AM29FXXXB series chip |
| SO452 | XDPG15CH MC68HC05BX(PLCC52) Adapter | Read/write MC68HC05BX (PLCC52 package) series chip |
| SO459-D | TMS370(PLCC28) Adapter | Read & write TMS370(PLCC28 package)chip, Read / Write old type Jetta immo box |
| SO536 | ELV Emulator for Audi C6 Q7 A6 Steer Column Module J518 | repair the AUDI sixth Gen A6 Q7 Audi C6 steering column lock J518 ELV module failure replacement emulator |
| SF273 | BMW ISN DME Clone Cable | B38, N13, N20, N52, N55, MSV90 |
VVDI Prog Reviews:
Review 1: The first job i did with this kit was actually a 2004 for Suzuki Jimny, literally within around 30 – 45 minutes of the parcel being delivered. The software was quick and easy to install (No cd provided, need to download from dealer website and update to latest version).
Anyway, for the for Suzuki i used the VVDI-prog with the EEPROM clip adapter to read the immobox 24c01 in-circuit. Then using the VVDI2 immobiliser data tool, i was able to create a dealer key with an Xhorse 4d/4c chip. Write the new dump back to the immobox with VVDI-prog, put it all back together and worked first time thankfully after previous failed attempts with other devices.
Anyway end goal complete and happy with the new purchase
Review 2: I did some testing on the bench with a for BMW EWS3 using VVDI2 with the CAS adapter cable (Needs external 12Vdc supply). It reads the EWS ok, but can’t write a file back to EWS.
I will try reading the EWS3+ that is in my car and produce a dealer key for it.
The file change km’ seems to read from dump ok, and will allow you to modify file with new km (untested on car though). If i get some time later on will try read/write with VVDIprog.
VVDI Prog FAQs:
Q: Whether can support read ezs crafter mc9s12dt256 0l01y?
A: Yes,it can support
Q: Will VVDI Prog support BMW isn coding function?
A: No, VVDI Prog is used to read chip data,it can support read BMW ISN.
Q: When i use the VVDI Prog to read PCF7952 chip, it failed “Chip not connect”, what can i do?
A: Please check the connection diagram,and the pins connection.
Q: When i try to update, it got error “UNABLE TO FINDE EQUIPMENT ”
A: Please check driver installation and vvdi prog connection,try to update again.
Q: About BMW ISN function?which bmw car models does it support?
A: If your BMW car is supported,the ISN will display automatically in the software.
Q: Need to read the airbag units from Renault, VW. The processor in blocks is SPC-560,will vvdi prog support?
A: Yes, it is supported.
Reviews
There are no reviews yet.