Opel OPCOM Diagnostic Interface is the OPCOM latest Version 2014 OBD2 diagonistic interface for Opel cars covers almost all Opel cars. OPCOPM China Clone OP-COM OPCOM 1.70/1.95/1.99 Firmware With PIC18F458 Chip And FTDI FT232RL Chip. CheShiTech.com OPEL OP COM Diagnostic Tool OPCOM OP-COM Can Bus USB Diagnostic Interface OPCOM Firmware 1.70/1.95/1.99 Hex can read and clear fault codes, support many control units.
Opel OPCOM Diagnostic Interface OPCOPM China Clone OP-COM OPCOM 1.70/1.95/1.99 Firmware With PIC18F458 Chip And FTDI FT232RL Chip
CheShiTech.com OPEL OP COM Diagnostic Tool OPCOM OP-COM Can Bus USB Diagnostic Interface OPCOM Firmware 1.70/1.95/1.99 Hex can read and clear fault codes, support many control units
Opcom Firmware Version Choose:
1. OP-COM OPCOM 1.99 Firmware
2. OP-COM OPCOM 1.95 Firmware(Add More $10)
3. OP-COM OPCOM 1.70 Firmware(Add More $10)
OP-COM OPCOM 1.99 Firmware PCB:
OP-COM OPCOM 1.95 Firmware PCB:
OP-COM OPCOM 1.70 Firmware PCB:
Opel OPCOM Diagnostic Interface Features:
1.Firmware: opcom V1.70/ V1.95/ V1.99
2.Feature: With PIC18F458 Chip And FTDI FT232RL Chip
3.Software version: 2014.01 ,It connects to the car during 2013-2014.
5. OPCOM is a special PC Based diagnostic interface especially for OPEL.
6. Never Update It Online, It Will Damage The OP-COM !
7. Support Language: Only English
Attention for Latest Opcom Software VAUX-COM_120309a.exe:
1. If you run it on XP or Win7, please make sure you install dotnetfx35_SP1 system cookie, or Opcom software can’t perform well
2. When you install on Win7, please open laptop via administration, and read the installation video on CD carefully
Note:
1. CD probelms:We send the CD as a free gift , So pls do not open a dispute or give a negative feedback because the CD was broken , long transport is easy to damage it ,just leave me your email,we will send it to you
2. Before you downloading or installing it , Pls shutdown the anti-virus Software in your computer first , Some files would be seem to virus, But it is harmless and necessary for installing
3. Never Update It Online, It Will Damage The OP-COM ! There is no need to active the software, can be used directly
Newest OPCOM Firmware 2014V Software Function:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information.
Full Fault Code Text Description:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps
It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
The programsupports many control units,like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module,Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps
Fault codes will be shown with all available information:
Full fault code text description
Full status information (Present, Not present, Intermittent)
You can print out, save, or copy the fault codes to any other application.
From the fault codes window, you can go directly to the measuring blocks window.
The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.
With OP-COM:
* You can learn keys to immobiliser, and remote keys to the central door locking, or alarm.
* You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
* You will need the vehicle security code, which can be found on the CAR-PASS.
* You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B
* You can code SAB6, and SAB8 airbags with the software.
The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
* Support 2008 Models
* Support Saab 9-5 and Saab 9-3 CAN
* Covers almost all Opel cars from 1992 – 2008, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B
OP-COM is currently available at the following languages:
English only
IMPORTANT:The program can only be used with a special interface
Hardware.
A simple serial or USB port based standard interfaces, (K, KKL, etc) cannot be used!
Opcom China Clone 2014 Package list:
1pc x OP COM Interface
1pc x USB Cable
1pc x Opcom China Clone Software and Drivers CD
Reviews
There are no reviews yet.