Real Cat Caterpillar Communication Adapter 3 Cat ET 3 is Real Cat caterpillar adapter 3 diagnostic tool Update from cat comm ii adapter. Super CAT Caterpillar ET Diagnostic Adapter iii With Cat ET 2019C Download Software And Caterpillar ET 2024a. CheShiTech.com Real CAT Caterpillar ET Diagnostic Tool Cat Comm Adapter 3 Truck Scanner With 2024A Caterpillar Electronic Technician software include the 10 factory password generator Need Activation By Keygen.
Real Cat Caterpillar Communication Adapter 3 Cat ET 3 Super CAT Caterpillar ET Diagnostic Adapter iii With Cat ET 2019C Download Software And Caterpillar ET 2024a
CheShiTech.com Real CAT Caterpillar ET Diagnostic Tool Cat Comm Adapter 3 Truck Scanner With 2024A Caterpillar Electronic Technician software include the 10 factory password generator Need Activation By Keygen
Note: CheShiTech.com This Real cat et diagnostic tool is not the caterpillar wireless communication adapter, it is the best quality CAT Caterpillar et diagnostic adapter iii without wifi/wireless function.
Package with 6pin,9pin and 15pin cable for both new and old trucks.
Choose Caterpillar Electronic Technician Software:
1.CAT Caterpillar Adapter III With Cat ET 2019C Software
2.CAT Caterpillar Adapter III With Cat ET 2024A Software [PlusUS$89.99.00]
3.CAT Caterpillar Adapter III Plus Panasonic FZ-G1 Tablet With 2024A Cat ET Download Software [PlusUS$700.00]
Top 5 Reasons To Get CAT Caterpillar ET Diagnostic Tool Adapter 3:
1. Latest Version:2024A 2019C（option), pls note: 2020-2023 software version include the 10 factory password generator. when you push the ctrl+f2 shortcut button,you can open the 10 bits of password generator.
2. Supported Operating System: Windows 7 32 bit, Wnidows 7 64 bit, Windows 8/8.1 32 bit, Windows 8/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit
3. We will activate it after installing 2024A 2019C version software.(After the installation , please contact us help you active the software by remote）
4. Supported Language: Chinese(Simplified),Danish, German(Germany), French(France), Portuguese (Portugal), Japanese, Spanish (tradition), Italian(Italy), English(America)
5. Support caterpillar diagnostic till 2024
Caterpillar electronic technician 2024A (replaces CAT ET 2021C, 2021B, 2021A, 2020A, 2019C, 2019B) with WinFlash future is an updated version of the caterpillar dealer diagnostic software that can help technicians to diagnose existing and potential problems with their electronically controlled Caterpillar Engines and Machines.
2024A Caterpillar Electronic Technician softwarer With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2024.
Caterpillar ET 2024A (replaces CAT ET 2019C, 2021B) Electronic Technician Diagnostic Software:
Caterpillar ET 2024A (replaces CAT ET 2019C, 2021B) Electronic Technician Diagnostic Software:
Brand:Caterpillar
Region: WorldWide
Support Multi-languages：English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Compatible OS: Windows 7 32 bit, Windows 7 64 bit, Windows 8/8.1 32 bit, Windows 8/8.1 64 bit, Windows 10 32 bit,
Windows 10 64 bit
Support All cars of CAT
With the CAT Diagnostic Tool, you can:
View active and logged diagnostics
View events where irregularities occurred and were logged by the ECM
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously
Record and log performance data
Graph a group of status parameters
View the current configuration of an ECM
Change ECM configurations
Perform diagnostic tests
Perform calibrations
Print reports and diagnostic results
For some machine and engine products, additional functionality has been included with the service tool program
Product Description
CAT Caterpillar ET Diagnostic Tool from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the “ease of use.” The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.
CAT Caterpillar ET Diagnostic Tool enable service technicians to reprogram ECMs, reconfigure control system parameters, fine tune performance or diagnose the root cause of a failure the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately. The service tool communicates with any system using ATA (J1708), J1939 or the Caterpillar proprietary data link networks. The service tools provide information and features needed to help a technician diagnose problems and perform repairs and to customize and personalize the operation of a product. By allowing customers to design flexibility and configurability into a product, Caterpillar service tools stretch beyond the capabilities of preprogrammed ECMs or onboard display systems.
PC, Communication Hardware, and Cable Requirements
To run the service tool, the next PC, communication hardware, and cable requirements must be met.
NOTE: The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the service tool.
PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of the available hard disk drive
DVD-ROM drive (optionally)
15.4-inch XGA Screen (1280×1024 compatible)
Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.
Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.
The list of supported CAT machines and engines can be found below:
Engines:
Electric Power
Electric Power Generation
Industrial
Marine Power Systems
Oil and Gas
Machines:
Articulated Trucks
Asphalt Pavers
Backhoe Loaders
Cold Planers
Compactors
Dozers
Drills
Excavators
Feller Bunchers
Forest Machines
Forwarders
Harvesters
Hydraulic Mining Shovels
Knuckleboom Loaders
Material Handlers
Motor Graders
Off-Highway Trucks
Pipelayers
Road Reclaimers
Site Prep Tractors
Skid Steer and Compact Track Loaders
Skidders
Telehandlers
Track Loaders
Underground – Hard Rock
Underground – Longwall
Underground – Room and Pillar
Utility Vehicles
Wheel Dozers
Wheel Excavators
Wheel Loaders
Wheel Tractor-Scrapers
Option 1:
Package
1.Real CAT et3 Comm Adapter III (it’s real cat et 3,not adapter 2,please check Communication port)
2.USB Cable(From device to your computer)
3.J1939/J1708 9PIN Cable
4.Cat ET 2019C software DVD
5.14PIN Cable(for new truck)
6.6PIN Cable(for old truck)
7.Plastic box
Option 2 :
Package
1.Real CAT et3 Comm Adapter III (it’s real cat et 3,not adapter 2,please check Communication port)
2.USB Cable(From device to your computer)
3.J1939/J1708 9PIN Cable
4.CAT ET 2023A software DVD
5.14PIN Cable(for new truck)
6.6PIN Cable(for old truck)
7.Plastic box
Option 3 :
Package
1.Real CAT et3 Comm Adapter III (it’s real cat et 3,not adapter 2,please check Communication port)
2.USB Cable(From device to your computer)
3.J1939/J1708 9PIN Cable
4.ET software DVD
5.14PIN Cable(for new truck)
6.6PIN Cable(for old truck)
7.Plastic box
8.1pc x Second-hand Panasonic FZ-G1 Tablet With 2023A Cat Software (The software has been installed and activated）
Original Factory Caterpillar ET3 Adapter III Compare With OEM Caterpillar ET Diagnostic Adpater III
1. Original Factory CAT ET can use once pluged, no need install the USB drive, the software can automatic realize it for ET3 Adapter, and the machine can automatic weld the high quality Circuit board, quality will be more reliable.
2. The OEM Caterpillar ET Diagnostic Adapter III need use USB Drive to install, and need choose the COM Port, and in the software ET also need choose ET2 then can be used.
The Details as follows:
What’s New – 2022A
Microsoft® Windows™ 11 Compatibility
Service tool testing has been performed and the service tool is compatible with Windows 11.
ECM File Replacement Compare Feature
The service tool now has an ECM Replacement File Compare feature for troubleshooting purposes. This feature allows the user to compare one ECM replacement file with another from within the ECM Replacement feature screen. The feature will highlight the differences between the selected files as a whole or the user may select the “only show differences” checkbox.
Configuration Group Headings on ECM Replacement Feature
In order to help the user find ECM replacement configuration items easier, configuration items in the ECM Replacement, Fleet Configuration, and Product ECM features are now grouped under their group sub-headings, as is done in the main configuration feature.
What’s New – 2021C
Feature Protection System Password Copy
The Feature Protection System (FPS) has a new “Easy Copy” link to copy passwords in a single operation. The service tool can automatically obtain the passwords from the clipboard and populate the FPS dialog. The service tool dialog also has a new “Easy Paste” button that allows the user to paste data of the correct format from the clipboard. Passwords can still be pasted using customary copy/paste operations, such as the context menu or the CTRL + V hotkey combination.
Screen Resolution Requirement Update
The minimum requirement for screen resolution has been updated to 1366×768, or at least 1366 pixels horizontally and at least 768 pixels vertically. The recommended screen resolution is at least 1600×1200. The service tool window displays with a minimum size of 1024×680.
What’s New – 2021B
End of Support for Windows 8
Microsoft is ending extended support for Windows 8 as of January 2023. The service tool will be ending support for Windows 8 after the
2021C release.
Calibration Images
Images attached to calibration instructions will no longer need to be opened manually to be viewed by a technician. The service tool will now have split user interface windows for calibrations that display pictures. This will allow the technician to see the images without having to navigate away from the instructions. Images may be opened into individual windows and resized for better clarity. The user interface for calibrations that do not display pictures will remain unchanged.
Default PC Browser
The service tool will no longer automatically launch web pages in Microsoft Internet Explorer. Web pages will now launch in whatever application is configured as the default internet browser. Certain web pages require a specific browser and may launch in a different browser.
What’s New – 2020A
Product Status Report Updates
The Product Status Report has been updated to include throttle configuration information.
Built-in Factory Password Generator
The experimental feature allows you to decode (18-Bit passwords not supported) factory passwords
What’s New – 2019C
Indication of Selected Communications Adapter
The service tool now displays the selected communications adapter when the service tool is disconnected. The adapter name is displayed in the status area at the bottom right of the service tool window.
Reviews
There are no reviews yet.