OP-COM Diagnostic Interface Opcom China Clone 2014 OPEL OPCOM 1.99/1.70/1.95 With PIC18F458 and FT232RL Chip makes OPCOM OBD2 Scanner Working Stable

描述

OP-COM Diagnostic Interface Opcom China Clone 2014 can read and clear fault codes, support many control units. OPEL OPCOM 1.99/1.70/1.95 With PIC18F458 and FT232RL Chip makes OPCOM OBD2 Scanner Working Stable. CheShiTech.com OPCOM Diagnostic Connector Tool OPCOM Diagnostic USB Cable With Firmware V2014 Covers almost all Opel cars from 1992 – 2008.

---

OP-COM Diagnostic Interface Opcom China Clone 2014 OPEL OPCOM 1.99/1.70/1.95 With PIC18F458 and FT232RL Chip makes OPCOM OBD2 Scanner Working Stable

CheShiTech.com OPCOM Diagnostic Connector Tool OPCOM Diagnostic USB Cable With Firmware V2014 Covers almost all Opel cars from 1992 – 2008

 

Hardware Version:

OPEL OPCOM 1.99
OPEL OPCOM 1.70
OPEL OPCOM 1.95

OPCOM 1.99 Software:

https://mega.nz/file/GrogiAxY#AbhFIVymeTP9jq67Md46i8-X9Z13Tk_2UbqWs5UTqGE

Reasons To Get Our OPCOM V1.70/V1.95 /V1.99:

1. There are Three options to choose in the link, pls choose according to your need.

2. OPCOM is a special PC Based diagnostic interface especially for OPEL.

3. OPCOM can support win7 32bit/ XP system!

4. With PIC18F458 chip and FT232RL chip that makes OPCOM be very stable and high speed.

5. Please never update it online, or it will be damaged.

OPEL OPCOM v1.99 PCB:

OPEL OPCOM v1.70 PCB:

OPEL OPCOM v1.95 PCB:

It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.

The programsupports many control units,like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

PIN6-PIN14 PIN3-PIN11 PIN1

HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps

HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps

Fault codes will be shown with all available information:

Full fault code text description
Full status information (Present, Not present, Intermittent)

You can print out, save, or copy the fault codes to any other application.

From the fault codes window, you can go directly to the measuring blocks window.
The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.
 
With OP-COM:

* You can learn keys to immobiliser, and remote keys to the central door locking, or alarm.
* You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
* You will need the vehicle security code, which can be found on the CAR-PASS.
* You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B
* You can code SAB6, and SAB8 airbags with the software.

The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.

* Support 2008 Models
* Support Saab 9-5 and Saab 9-3 CAN
* Covers almost all Opel cars from 1992 – 2008, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B

OP-COM is currently available at the following languages:
English only

IMPORTANT:The program can only be used with a special interface

Hardware.
A simple serial or USB port based standard interfaces, (K, KKL, etc) cannot be used!

Opcom China Clone 2014 Package list:

1pc x OP COM Interface
1pc x USB Cable
1pc x Opcom China Clone Software and OPCOM 1.99 Drivers CD

 

CheShiTech.com— China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: https://www.cheshitech.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp/Wechat: +86-19870637508/+86-13691674080
https://api.whatsapp.com/send?phone=8619870637508
https://api.whatsapp.com/send?phone=8613691674080